New Projects - Nuclear Oklo advances Ohio nuclear plans, gets key fed approval for fuel fabrication facility Oklo announced the signing of a lands right agreement with SODI for land including options for the siting of two nuclear plants. Clarion Energy Content Directors 2.2.2024 Share Oklo has a partnership with Southern Ohio Diversification Initiative at the DOE Piketon Site for its second and third commercial plants (Image: Oklo) Advanced nuclear company Oklo announced the signing of a lands right agreement with the non-profit Southern Ohio Diversification Initiative (SODI) for land including options for the siting of two plants. This agreement is an extension of Oklo and SODI’s announcement in May 2023, related to the deployment of two Aurora powerhouses, and the company says it signifies progress toward siting development and implementation. SODI is a nonprofit community improvement corporation and serves as the DOE-designated community reuse organization for the former Portsmouth Gaseous Diffusion Plant (PORTS) facility near Piketon, Ohio. Subject to the terms and conditions of the land rights agreement and in exchange for an upfront fee, which will be credited toward any purchase by Oklo under the land rights agreement, SODI has granted Oklo an option and right of first refusal to purchase land in Southern Ohio from SODI. Oklo aims to build its second and third plants on land owned by SODI, it announced last May. The land will host two commercial 15-MWe Aurora powerhouses (30 MWe total) and over 50 MW of clean heating, with opportunities to expand. Oklo’s Aurora powerhouse design is a fast neutron reactor that would transport heat from the reactor core to a power conversion system and is designed to run on material from used nuclear fuel known as HALEU, or “high assay, low-enriched uranium.” The reactor builds on the Experimental Breeder Reactor-II and space reactor legacy. Oklo obtained a site use permit from the DOE for the Idaho site at Idaho National Laboratory (INL) in 2019. The company applied with the U.S. Nuclear Regulatory Commission (NRC) in March 2020 to build and operate a reactor at INL. This was the first combined license application ever accepted by the NRC for an advanced non-light water reactor. The company recently announced that the U.S. Department of Energy (DOE) has reviewed and approved the Safety Design Strategy (SDS) for its Aurora Fuel Fabrication Facility at INL. The Aurora Fuel Fabrication Facility is being designed to demonstrate the reuse of recovered nuclear material to support Oklo’s planned commercial advanced fission power plant demonstration at INL. The Aurora Fuel Fabrication Facility (Courtesy Idaho National Laboratory) Oklo was selected for access to the fuel material through a competitive process launched in 2019 by INL. The goal of the solicitation was to accelerate the deployment of commercially viable reactors by providing developers with access to the material needed to produce fuel for their reactors. The DOE is supporting INL to produce High-Assay, Low-Enriched Uranium for advanced reactors by recovering uranium through electrorefining treatment on used fuel from the now-decommissioned Experimental Breeder Reactor-II. The SDS marks the initial stage in a comprehensive DOE approval process prior to the operation of the Aurora Fuel Fabrication Facility. Oklo and Battelle Energy Alliance, operator of INL, are currently working on the next phase, focusing on the Conceptual Safety Design Report (CSDR). The purpose of the CSDR is to summarize the hazard analysis efforts and safety-in-design decisions incorporated into the conceptual design, along with any identified project risks associated with the selected strategies. Related Articles Dominion Energy eyes developing small modular reactor in Virginia DOE doles out $900 million for next-gen small modular reactor deployment Plant Vogtle Unit 4 is now online Westinghouse signs agreement to deploy AP300 SMR fleet in the U.K.
